Description: Stickers stick to almost all flat surfaces! Just peel and stick! Long lasting 5+ year life expectancy outdoors and 7+ interior durability Decorate your: Camper, Truck, Motor Home, Walls, Boat, Refrigerator almost any flat smooth clean surface! Application instructions: 1. Wipe the sticker to ensure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers stick best when cleaning smooth surfaces.3. Remove the wax backing slowly, making sure the sticker stays stuck to the clear transfer tape4. Carefully place the sticker in the desired area.5. Wipe the sticker from side to side, eliminating any air bubbles.6. Use an object such as a credit card to ensure that the entire sticker is fully adhered to the surface.7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.8. Check for air bubbles. In most cases, air bubbles can be worked off the edge of the sticker, but if not, the pin hole will allow air to escape and become virtually invisible. Your sticker is now hassle-free! Application Tips: 1. Do not apply to extremely cold or hot surfaces. The ideal temperature must be between 60 deg; f to 90 deg; f.2. Do not touch the glue, the oils from the skin will prevent it from sticking.3. Before applying the decal, please make sure there is no wax or greasy products on the surface. Information about vinyl decals: These are DIE-CUT decals means there is no background. If there is a background color in the photo, it is only used as an example. The background color will be the color of the surface you place the decal on, or clear if you place it on a window. Vinyl decals come in 3 pieces: 1. The top layer is a clear transfer tape. (It holds the sticker or sticker together until it is applied)2. The middle layer is your actual sticker or decal(It is placed between the application tape and the wax backing)3. The bottom layer is a wax backing.(Protects the adhesive until the sticker is ready to apply)4. Do not wash within 24 hours.