Feature:1. Metal gears are conducive to hightorsion output of highpower motors, sturdy and long lasting2. Robot servo has high stability and can stably control the steering gear to work within a safe torsion range. Even if the fuse is blown, the steering gear can continue to work3. Servo is perfectly compatible with remote systems such as Futaba, JR, Hitec, etc.4. Robot servo can be widely used in robots, robotic arms, production lines, camera pantilt control robots5. The Dhole antiskid key connection on the servo arm plate is compatible with the ASMC ASME servo axle, making the installation very simpleSpecification:Item Type: Robotic Servo MotorMaterial: Aluminum AlloyMaximum Torsion: 380kg.cm (24V) (Actual Measurement, Not Theoretically Calculated Value)3648N.cm(24V) (Actual Measurement, Not Theoretically Calculated Value)190kg.cm(12V) (Actual Measurement, Not Theoretical Calculation Value)1824N.cm(12V) (Actual Measurement, Not Theoretically Calculated Value)Angular Speed: 0.5s or 60(0.5s is Needed for 60Rotation), at 24V 1.0s or 60(1.0s is Required for 60Rotation), at 12V Rotation Angle: 300MaxiumInput Mode: Pulse Signal (Remote Control, Multi-Channel Steering Gear Controller, Single-Chip Microcomputer) or Analog Voltage Signal (Potentiometer)Pulse Signal Input Range: 0.5ms-2.5ms Suitable for All "Multi-Channel Steering Gear Controllers", "1ms-2ms Model Airplane Remote Control", "MCU Programming", Etc. Voltage Signal Input Range: 0V to and5VControl Accuracy: 0.32Rated Voltage: 12V-24V or DC (11V or Minium-30V or Maxium, Limit Voltage)No-Load Current: 500mA (Current Limit: 5A, Recommended to Use A Switching Power Supply or Battery Greater than 5A)Limit Angle: 150 or 0-300(Maxium) The Steering Gear Has Electronic Limit AdjustmentAnalog Voltage Mode: 0V-5V Input Voltage (0.22V Corresponds to 0, 4.78V Corresponds to 300)Material: Gear and Shaft: Alloy Steel Gear Box: Cast AluminumWeight: Approx. 550g or 19.4ozDimension Size: Approx. 95 x 60 x 110mm or 3.7 x 2.3 x 4.3inMechanical Life: andgt 1,000000 Cycles or Full Load (Conservative Value)Limit ParametersLimit Voltage: 11V-30V or DC(Maxium)Current Limit Value: 5A0.2A(Maxium)Working Angle: 150 or 0-300(Maxium)RC Mode: 1ms Pulse Mode: 1ms-2ms (Pulse Width) or 50Hz-333Hz (Frequency)2ms Pulse Mode: 0.5ms-2.5ms (Pulse Width) or 50Hz-333Hz (Frequency)Analog Voltage Mode: 0V-5V Input Voltage 0.22V Corresponds to 0, 4.78V Corresponds to 300).Package List:1 x Robotic Arm Servo1 x Connection LineNote:1 Don't overload use2 Do not use over pressure3 Do not use over current