Features: 1. This DIY plastic molded paving mold is spread in Europe and America, is a personalized brick mold. 2. With this Molded Mulch Film,you can personalized create your style garden path in minutes. 3. DIY plastic molded paving mold, is a personalized brick mold,laying out the effect posted up like blocks of stones, so the path is moreexotic, to create a style of their own garden path.4.Spray this concrete mold garden with garden hose to clean the concrete garden molds for re-use purpose. 5.You can use it many times that is guaranteed by manufacturer，perfect Father's Day gift for your father or grandfather. Specification: Newand high quality Material: PPResin Size: 43x43x4cm Color: Black How to use this Concrete Paver Mold to build the pathways: Step 1: Mix cement withwater, according to package directions. When prepared to use, the concrete will bethe consistency of oatmeal and thick enough to hold an edge when you slice intoit with a shovel. Step 2: Fill the paver mold,scooping the concrete in with a shovel and making sure to fill each area. Step 3: Using rubber gloves,spread the concrete around the mold, filling in any gaps or low points. Tap themold with your hand to eliminate any air bubbles. Step 4: Following thecontours of the mold, smooth out the concrete, wiping away any excess. Step 5: Allow the concrete toset for a maximum of five minutes, then carefully remove the mold. For the nextstretch, rotate the mold a quarter-turn and place it beside the paver justcompleted, angling slightly if you're creating a curving pathway. Step 6: After letting theconcrete cure overnight, fill the cracks with dirt and wash away any excess.Wet the ground around the newly formed pavers to help them settle Package include: 1 x Garden Walk Maker Mould Notice: Please allow 1-3cm error due to manual measurement. .