Feature:1. AC to DC Power Supply: This is a constant voltage switching power supply, input 200240VAC, output 48VDC, with high accuracy output2. High Performance: The switching power supply has high efficiency, long service life, low energy consumption, low output ripple, and low temperature resistance3. Multiple Protections: The switching power supply has short circuit protection, overload and over voltage protection, preventing electrical fires caused by short circuit of the electrical equipment at the output end due to faults, which is safe and reliable4. Aluminum Alloy Shell: The switching power supply shell is made of excellent aluminum alloy material, which has good corrosion resistance, light weight and high strength5. Multi Purpose: This regulated power supply is suitable for indoor applications including LED strip light, LED display, 3D printer, amplifier, radio, CCTV camera and computer project, etc.Specification:Item Type: Constant Voltage Switching Power SupplyMaterial: Aluminum AlloyOutput Features:Rated Current: 25ARipple: 120mVp-pOutput Accuracy: 2%Line Adjustment Rate: 10%Load Regulation Rate: 20%Rated Power: 1200wOutput Range: 48VSetup Rise Hold Time: 250ms, 30ms, 20ms/220VACInput Features:Input Current: 6AFrequency Range: 47-63HZEfficiency: 85%Protection Features:Overload Protection: 105-150% rated power, automatic recoveryShort Circuit Protection: Turn off the output when short circuited, and recover automatically after releaseOther Functions:Environmental Parameters:Working Temperature and Humidity: -40 to +50 at 100%L0AD, +60 at 60%L0AD, 20%-90%RHStorage Temperature and Humidity: -20 to +85, 10%-95%RHHumidity Drift: 0.03%/(0-50)Vibration: 10-500HZ, 2G 10min/1cycle, PERLOD ROR 60min.EACH AXESSize: Approx. 240x125x65mm / 9.4x4.9x2.6inSafety and EMC Standards:Safety Standard: MEET GB4943Insulation Resistance: I/P-0/P, I/P-FG, 0/P-FG : 500VDC/100M Ohms.Package List:1 xConstant Voltage Switching Power SupplyNote:1. All parameters need to measured under the conditions of rated voltage 220VAC input, rated load, ambient temperature of 20 degrees Celsius, and humidity of 70%.2. Accuracy: Including setting error, line adjustment rate, load adjustment rate, etc.3. Ripple Test: Connect the power supply and the load with a 30CM long stranded wire, connect 0.1u and 47u capacitors at the load end, and measure with a 20Hz oscilloscope at the load end.4. Line Regulation Rate: Under rated load conditions, the input voltage is measured from low to high change.5. Load Regulation Rate: The measured output is measured from 0% load to 100% load change.6. Each channel can output the maximum current, but the sum of the total load cannot exceed the maximum output power.