Feature: 1. [Accurate Measures] This multimeter can test AC/DC voltage, resistance, capacitance, frequency, the measurement data is trustworthy. 2. [Safety Protection] Digital multimeter is NCV non contact voltage detection, insulation test, safer to avoid the dangerous of electric shock. 3. [Using Convenient] After starting the measurement, the measured object will be automatically recognized, so that the voltage intelligent anti burning is realized, and novices can also play freely. 4. [Powerful Function] This meter is an intelligent true effective value digital multimeter. With intelligent and professional measurement functions. 5. [Durable And Sturdy] The intelligent multimeter has complete functions, made of high quality ABS material, long service life. It has gear and analog bar display. Specification: Item Type: Multimeter Material: ABS Model: HT125B Battery: 1.5V 2 x AAA (not included) Uses: Household circuit testing, industrial circuit testing, office circuit testing, outdoor work circuit testing Support Language: English Environmental Conditions for use: САT.Ⅲ 600v Pollution Degree: 2 Altitude: <2000m Working Temperature and Humidity: 0~40℃ (<80%RH, <10°C non condensing) Storage Temperature and Humidity: -10~60℃ (<70%RH, remove the battery) Temperature Coefficient: 0.1 x Accuracy/°C (<18°C or >28°C) Display: 4000 Counts, updated about 3 times per second Over Range Indication: Display "OL" 2. Precise indicators DC voltage 400mV 0.1mV ±(0.5%+3) 4V 0.001V 40V 0.01V 400V 0.1V 600V 1V AC voltage 4V 0.001V ±(0.8%+3) 40V 0.01V 400V 0.1V 600V 1V Resistance 400Ω 0.1Ω ±(1.0%+5) 4KΩ 0.001KΩ 40KΩ 0.01KΩ 400KΩ 0.1KΩ 4MΩ 0.001MΩ 40KΩ 0.01MΩ ±(1.5%+10) Capacitance 4nF 0.001nF ±(4.0%+5) 40nF 0.01nF 400nF 0.1nF 4μF 0.001μF 40μF 0.01μF 400μF 0.1μF 4mF 0.001mF Frequency 4Hz 0.001Hz ±(0.5%+3) 40Hz 0.01Hz 400Hz 0.1Hz 4KHz 0.001KHz 40KHz 0.01KHz 400KHz 0.1KHz 4MHz 0.001MHz . Package List: 1 x Digital Multimeter (Battery Not Included)2 x Test Lead1 x Manual Note: 1. Please be especially careful when measuring over 60VDC.30VAC RMS or 42V peak. This type of voltage has the dangerous of electric shock.2. Do not measure the voltage higher than the rated value between the terminals or between the terminals and the ground.3. Check whether the meter is working normally by measuring the known voltage. If it is abnormal or damaged, please do not use it again.4. Before using the meter, please check whether there are cracks or damage to the plastic parts of the meter casing, if any, please do not use it again.5. Before using the meter, please check whether the test leads are cracked or damaged. If so, please replace the test leads of the same model and the same electrical specifications.6. Please use the meter according to the measurement category, voltage or current rating specified on the meter or manual.