Super sound quality, onboard 2W mono amplifier (5V power supply up to 3W) directly connected to the speaker (recommended with 4 ohm 3W speaker), 3.5mm gold-plated headphone can be connected to headphones or external audio.With -USB power supply interface, it can be powered by mobile power supply or USB charger through the mobile phone data cable. It can also use 3.7V lithium battery and USB 5V power supply.Support TF card (mobile phone storage card), U disk playback mode;There is no need for welding with horn terminal, which is convenient for wiring;Modular design is easy to .product 1. Support MP3 , auto play when power on, red LED indicator is updated when playing;2. Support U disk (tested 32G), TF card (tested 16G) playback mode; power on default TF card mode, if there is no TF card automatically jump to U disk mode, and both devices are installed, you can manually Set the playback mode, refer to the key operation instructions for details.3. The buttons can adjust the up and down track switching, volume +-, pause / play, mode switching, see the button operation instructions for details;4. You can press the button to set the "single / full song" , the default is the full song at power-on, press the "Repeat" key to change the modeKey operation instructions"Prev / V--" key: "Short press" is to switch "previous" song, "long press" is "decreasing volume"" / v ++" key: "Short press" is to switch "" song, "Long press" is "Volume increasing""P / P / Mode" key: "Short press" for "play / pause" switch, "long press" for U disk, TF card "mode" "Repeat" key: "Short press", for "single / full song" switching (no long press function)Product specificationsPower supply range: 3.7 ~ 5.5VExquisite double-layer board design, large area copper plating, stable and .colour: blueMaterial: PCBsize: 45 * 36mmPackage Contents: 1 * mp3 decoding moduleNote: 1. "Long press" time is about 2S2. If you use U disk mode, 5V power supply is recommended, some U disks do not support 3.7V power supply.