Features 1、Wide Application: This antenna tuner and power standing wave meter has a wide range of applications, and supports any radio station and antenna, no professional data cable is needed. 2、2 Adjustment Modes: This antenna tuner standing wave meter has two adjustment modes, it supports both manual tuning and auto tuning modes. 3、Compact And Portable: This antenna tuner and SWR power meter measures only 154mm x 74mm x 29mm, which is small in size and light in weight, very convenient to carry and use. 4、6 Status Interfaces Supported: This antenna tuner and standing wavemeter supports 6 status interfaces, including user storage interface, bar power standing wave meter interface, large font interface, standing wave curve interface, power curve interface, relay and battery voltage status interface. 5、Large Capacity 3300mAh Lithium Battery: This antenna tuner and antenna power SWR meter has a built in large capacity 3300mAh lithium battery, untuned standby up to 150 to 200 hours, average standby time after tuning is about 15 hours, perfect for outdoor portable operation. Specification Item Type: Antenna Tuner Power Standing Wavemeter Material: Aluminum Alloy Model: AT 100M Pro Supported Radio: Any Radio Support Antenna: Any Antenna Frequency: 1.8-30Mhz Power Range: 1-18Mhz, SSB, CW 0.1W-125W, Peak 150W 18-30Mhz, SSB, CW 0.1W-50W 1-30Mhz, FM, AM, FT8 0.1W-50W Capacitance: Maximum 3869pF Inductance: 17.21uH Maximum CW Key: 3.5mm Jack Charging: Type C USB 5V 1A ( Support Overcharge and Overdischarge Guard ) Battery: Rechargeable Lithium Battery 3300mAh x 1 ( Shipped With Built In Battery ) Shutdown Current: Approx. 15uA Standby Current: Approx. 13mA, Approx. 150-200 Hours Standby ( No Tuning Status ) Tuning Standby: Starting 1-3 relays requires a current of 130-330mA, about 10-25 hours of standby. Charging Time: Fully charged for about 4 hours. LEDs are red when charging and green when fully charged. Package List 1 x Antenna Tuner Power Standing Wavemeter 1 x L Wrench 1 x USB Cable 1 x Foot Pad 1 x Manual