1. Remote control: connect S1 Wi-Fi temperature control; Wi-Fi up to 2.4GHz, then you can adjust the screen or position temperature adjustment on your phone through the APP anytime and anywhere.2. Single relay output: support one device. automatic switch3. The 2.4-inch high-definition screen displays the set temperature and measured temperature values at the same time.4. Support temperature calibration.Temperature setting switch, support C or F5. Tuya app and smart life supportPrecautions: 1. Metal Magnetic Probes and Temperature Do not place probes or metal wires in fire.2. Metal magnetic probe Do not put the probe in water, it may cause inaccurate measurement.3. Only use 2.4GHz Wi-Fi support (IEEE 802.11b/g support)4. Wireless connection: Wi-Fi connection for iOS and Android (Tuya App or Smart Life)Product Control Type: TemperatureControl Mode: Intelligent Temperature Control RegulatorTemperature range: -20~120C (C)Temperature measurement error: 1C (C)Installation type: socket typeOutput signal: 2 (mA) (mA)Current: 10A. 16A maxPower: 1200W (120VAC), 2200W (220VAC)Maximum output: 3680W (230VAC)Humidity measurement range: 1 ~ 99% RHTemperature measurement range: -20 ~ 120 CPlug and Play: No complicated installation required.Plug Type: EU Plug, it applies to Indonesia, Germany, France, , Italy and so onvoltage: AC100-240VMaterial: plasticcolour: WhitePackage Contents: 1 x Temperature and humidity detector1 x Waterproof probe1 x Magnetic probe1 adapter1 x English instructions