100% brand new and high quality Features: Gigabit PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet. Deliver power and data with a single Ethernet cable for fewer wall plugs and messy cables. Extend power line to where no AC outlets are nearby, up to 300 feet away from the power source. A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable. You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter. Note: 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 3A with its 802.3af compliance. 3. Just put the split Ethernet aside if you don't need the data. 4. The Split Ethernet cable does not carry power anymore. Specifications: Compatible: IEEE802.3af/at Output: 5V/3A Data speed: 10/100/1000Mbps Input: DC 44-57V Size: approx. 78x28mm / 3.07x1.10in Note: Please allow 0-1cm error due to manual measurement. Please make sure you do not mind before purchasing. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you. Package Includes: 1 x Gigabit PoE Splitter