3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for efficient heating. Ideal for use in bathtubs, buckets, inflatable swimming pools, fish tanks, and other water containers. To use, ensure the water level is at least 25–30 cm deep so the heater can be fully submerged. The device will float on the surface; adjust the power cord to position it correctly. Always make sure the heating element is completely underwater during operation to prevent damage. For inflatable or plastic containers, place a ceramic tile under the heating tube to avoid direct contact with the container bottom. Fill the container with water, place the heater inside, and plug it in. The indicator light will turn on, and small bubbles will form around the heating element as it begins to warm the water. For large volumes, unplug the unit halfway through heating to check the temperature. Once the desired temperature is reached, unplug the power, wait 20 seconds, then remove the heater before using the water. Safety Notes: - Never touch the water while the heater is plugged in. - Always unplug the device before adjusting, removing, or coming into contact with the water. - The stainless steel heating element must remain fully submerged during use. - Do not use without water or while the heating element is exposed. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Immersion Heater (Adapter included based on destination country) Note: As an international seller, your order will be shipped from abroad. Please allow a minimum of 14 working days for delivery due to current global postal delays.