Features: 1. Ideal for preventing water from spreading in bathrooms and kitchens. Install this water retaining strip to contain water effectively. 2. The long, flexible design allows it to fit various layouts and shapes. 3. Acts as a shower barrier and retention system to keep water within the designated area. 4. Suitable for curbless showers and other wet areas where water containment is needed. 5. Comes with a self-adhesive backing for easy installation. Sits close to the ground to help prevent water leakage. Important Notice before applying the Water Barrier Strip: 1. The back of the strip has an adhesive layer, but it is for temporary assistance only. For proper fixation and sealing, silicone sealant must be applied to both sides and ends of the strip. 2. Clean the surface thoroughly; remove dust and moisture before application. Ensure the area is completely dry. 3. Determine the desired placement and mark the position with a pen. 4. Peel off the protective backing and place the strip along the marked line. 5. Apply silicone sealant along the edges where the strip meets the wall and floor to ensure a secure seal. 6. For best results, apply silicone sealant to both sides of the strip and allow it to cure for approximately 24 hours. Note: - Actual color may vary slightly due to differences in monitor displays and lighting conditions. - Allow for a measurement tolerance of 13 cm due to manual handling. Specification: Type: Water Barrier Strip Material: Silicone, self-adhesive Size: Width 1.6 cm, Height 3.0 cm Length: Available in 0.5 / 1.2 / 1.5 / 1.8 / 2 / 2.5 / 3 meters (optional) Package List: 1 x Water Barrier Strip