Item Type: Immersion Heater Material: ABS + Stainless Steel Rated Voltage: 220V Rated Frequency: 50Hz Rated Power: 2500W Heating Temperature: Maximum 75, Automatic Power off Power Cord Length: Approx. 1.2m/47.2in Maximum Hot Water Capacity: 40L Heating Time: 30 minutes 1The stainless steel heating tube heats up quickly, with high power, fast water boiling rate and high heating efficiency. 2Immersion heater adopts intelligent temperature control design, which automatically cuts off the power when the water is boiling. 3Power cord is made of copper wire and PVC sheath, which is resistant to high temperature and oxidation, and has a large load and stable current. 4The heating tube adopts a protective cover, and the heating tube is not exposed to avoid scalding the human body or the container. 5It is formed by multi channel die casting with a mold, and the connecting part of the heating tube and the power cord is firm and stable.1. The equipment needs to be completely immersed in water before it can be powered on. 2. Put it in the water and heat it and cut off the power for 30 seconds, then take it out of the water. 3. When using, the equipment should be completely immersed in water before it can be powered on, otherwise dry burning will occur.1 x ImmersionHeater 1 x Manual