Features: 1. If you are tired of water spreading in the bathroom and kitchen, install this water retaining strip to help contain water flow. 2. The long, flexible design allows for various shapes and custom fitting. 3. The shower barrier and retention system helps keep water inside the threshold area. 4. Ideal for curbless showers and other spaces where water containment is needed. 5. This product features a self-adhesive backing for easy installation and sits close to the ground to help prevent water leakage. Important Notice before applying Water Barrier Strip: 1. The back of the Water Barrier Strip has adhesive for temporary assistance only. For secure installation and sealing, glass glue (sealing glue) must be applied to both sides and ends of the strip. 2. Clean and dry the surface thoroughly before application; ensure it is free of dust and moisture. 3. Determine the desired placement and mark the position with a pen. 4. Peel off the backing tape and position the strip along the marked line. 5. Apply glass glue (sealing glue) between the wall and the strip to ensure a secure seal. 6. For best results, apply glass glue to both sides of the strip and allow it to cure for approximately 24 hours. Notice: - Actual color may vary slightly due to differences in monitor displays and lighting conditions. - Please allow 1–3 cm variation due to manual measurement. Specification: Type: Water Barrier Strip Material: Silicone, self-adhesive Size: Width 1.6 cm, Height 3.0 cm Length: 0.5 / 1.2 / 1.5 / 1.8 / 2 / 2.5 / 3 meters (available in options) Includes: 1 x Water Barrier Strip