1. We designed the housing for installing the 3.5 inch touch screen. When using the screen, remove the cover. The cover can be fitted with a cooling fan (the fan is not included), so you can use it with the cooling fan when you are not using the screen.2. Dual use: The chassis supports the installation of a 3.5 inch touch screen, and the cover and fan need to be removed for this use mode. (3.5 inch screen and fan cannot be installed at the same time); When the 3.5 inch touch screen is not used, it is generally a chassis with a cooling fan.3. Support cooling fan: You can install a cooling fan on the cover plate to achieve the best cooling effect and extend the service life of for raspberry pie.4. Bottom hanging hole: We have punched 2 holes at the bottom so that you can hang the chassis or other things. This design is convenient when using the 3.5 inch touch screen.5. How to the screen and shell: 1. Install for raspberry pie on the substrate; 2. Correctly insert the 3.5 inch touch screen into the raspberry pie through the GPIO pin (do not misplace it) 3. Install the cover plateProduct name: chassis shellMaterial: metalColour: BlackSpecification: separate metal shell of application: for 3B+/3BPackage Contents:1 x Metal shellOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.