Perfect for cooling your outdoor living areas. Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt test and other artificial fog. No air assistance is required, the system is simple, the point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect. Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, , component cooling, fruit Wax, tile glazing, plant humidification, salt test, artificial fog, humidification in other places, etc. Installation Steps: 1.Connect the adapter to the water tap. 2.Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities. 3.Using cable tie to fixed the pipe. 4.Turn on the tap slightly until are working, enjoy the cooling misting system. 5.Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time. Colour:Black + blue Material:Plastic + alloy Size:Pipe 6 meters Package Contents: 1*6 points internal thread tap connector 1*6 pcs nozzle 1*6 meter tube 1*pack cable tie 1*User manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.