Stainless steel cable kit Including 30m 2mm Nylon sheathed stainless steel wire,5PCS M4 304 stainless steel tensioner strainer hook, 3PCS M6 304 stainless steel expansion hook, 10PCS M4 304 stainless steel eyelets, 12PCS M2 304 stainless steel wire rope thimbles, 3PCS 304 stainless steel snap hook, 20PCS aluminum crimp sleeves, 4PCS 304 stainless steel rope chuck, 1PCS wrench. steel rope kit that is made of 304 stainless steel, (Note: the aluminum sleeve is made of aluminum, iron open-end wrench) which has excellent corrosion resistance and rust resistance, and is strong and durable. wire rope Use pliers can be Easily cut to desired length. Convenient assembly design of 304 stainless steel clothesline tension wire - each part is connected by wire, very easy to install and disassemble. The aluminum crimp ring sleeve can be easily installed in the steel cable and use special tools to compress and lock. The maximum lifting weight is 3KG, more than 3KG can be used with Cable chuck, which can bear the maximum weight of 14KG. Stainless steel cable Make plant supports Vines, jasmine, roses, plant climber, is strong and flexible, and the surface is smooth and will not scratch your hands when installed. Nothing protrudes, nothing dangles. strong and particularly flexible and strong.The connection between the wood screw and the turnbuckle is adjustable. Versatile stainless steel cable kit,The product can fulfill a wide range of door tasks,Including Suitable for outdoor applications of tent rope, climbing plant hanger, Outdoor String Light Hanging Kit, clothesline, outdoor hanging lights, deck railing, climbing plant trellis, tension wire, etc... Steel Cable Kit Make Fence Wire, Wire Mesh Wire Fence Kit Made as follows: 1. first thread the wire through one side of the aluminum crimp sleeves, around the teardrop eyelet and through the sleeve, pull tight and place the sleeve on a sturdy place like metal or paving slab and hit it with a hammer to compress it enough to hold the wire so it can't slip. 2.Measure how long you want the wire taking into account the length of the fitting of turnbuckle tension, then take an eyelet and clip it over the eye of the turnbuckle (not the hook end) and thread the wire through the fitting with the two nuts and bolts on it, and loop around the eyelet by teardrop shape and back through the nut and bolt connection, tighten the wire and screw in the bolts. 3.If attaching to wood, drill a pilot hole and screw in the screw eyelets , if you are fixing to brick or concrete, you will need a masonry bit and a hammer drill. Drill the hole, put a plastic plug (Note: this kit is not equipped with plastic expansion tube), then a screw eyelet. 4.Clip carabina on the opposite end thread and clip onto the screw eyelet, then hook the tensioner over the other screw eyelet and twist the tensioner to take up the slack and tension thread and you're done. It's a good kit with everything.< /p> (Small flat key equipped with a special double chuck)