Feature:1. Made of aluminum alloy material, engine hood cover buckle surface polishing treatment, corrosion resistant and not easy to fade.2. The locking pins fasten the vehicle hood and keeps it from vibrating while driving or cornering.3. Easy installation, directly replace the original latches without drilling required.4. Quick and flexible to lock and unlock, reinforced body mounts for extra strength and durability.5. A great decoration to enhance your custom car look, increase your car's line sense. Universal fit for most of car.6. Custom designed to fit for JK 20072017Specification:Condition: 100% Brand NewItem Type: Lock Catch BuckleMaterial: Aluminum AlloyColor: BlackLock Size: Approx.133mm/5.2inBuckle Size: Approx.49mm/1.9inGasket Size: Approx.35mm/1.4inWeight: Approx.930g/32.8ozFitment: Fit for JK 2007-2017Installation Steps:1. Remove the cover bayonet and front face, remove the cover nut with hex wrench from the side gaps.2. Align the corresponding gasket with the buckle hole of the new machine cover and tighten it.3. Screw and bayonet should be aligned with the original car's hole position and pressed tightly4. Unscrew the screw of the new machine cover button, remove the head of the machine cover button and leave the base5. Tighten the base screw to fix the "base" of the cover.6. Then reinstall the head of the cover button7. The machine cover buckle bayonet base to place the corresponding gasket two8. Align with the position above the original machine cover, fix and install with nut on the back side9. Put down and close the cover and press firmly with both hands when the cover is locked. "Ka" means the cover is locked.10. Installation completed. (hint: if the cover button cannot be locked, the position of the cover bayonet above should be adjusted)Package List:2 x Set Engine Cover Lock2 x Pack Fitting3 x Hex WrenchNote:Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.