This High Flow Nozzle uses a unique custom internal geometry to increase the area for improved thermal transfer to the filament.And increases your setup's volumetric flow rate, enabling you to print faster. The Nozzle is a preassembled nozzle and HeatBreak in one unit By adopting three metals -Hardened steel for tip, titanium alloy TC4 for inside tube, and rest is copper material, with different thermal conductivity. TriMetal: Hardened steel has high wear-resistance for longer , Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction. This Nozzle can reach super high temperature Coating not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance. Material: Hardened steel + TC4 titanium alloy + chromium zirconium copper + stainless steel colour: As shown Package Contents: 2 x hardened steel nozzles (1 each for 0.4mm/0.6mm) 2 x stainless steel nozzles (1 each for 0.4mm/0.6mm) 2 x red protective sleeves 2 x blue protective sleeves Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.