How To Replace a Band Saw Tire?1, Unplug saw, loosen the saw blade tension and remove the blade. Then remove saw wheel.2, Once removed, completely remove or cur the old tire and any residue left behind.3, Slide part of the tire onto the wheel rim, then slip a short rod or pipe between the tire and wheel. Roll the pipe around the rim once to equalize the tire's elasticity.4, Squeeze a small amount of glue onto a brush and apply it to the tire and wheel surface.Roll and repeat all the way around the rim. Let the glue dry for 24 hours before using the saw again.9inchDiameter: for 9inch (230mm) bandsaw wheelSuitable for Delta 28-150 BS100, , Grizzly band saws using 1570 & 1575mm bandsaw blades.Colour:blackMaterial:rubberSize: about 12.5mm wide x 3mm thickPackage Contents:2 x Band Saw Rubber TireOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.