Combination of Grit 2000 & 6000 Sharpening Stones: 2000 Grit for fine honing and 6000 grit to achieve a -sharp finish blade. Big enough to handle even the longest , and designed to fine-tune any bladeWidely Used Water Stone: Not only work for kitchen knives, gardening but also shaving and cutting gadgets, Woodworking and Carpentry Kit etc just except serrated blades and ceramic knivesPremium Material: Come from first-class white corundum, resist corrosion, heat and frictionSafe Sharpening: Equipped with a non-slip silicone for honing securelySharpening Guide Included: As easy as pie, even for green hands, all you need is Water, no oil required2000 Grit for Fine HoningUsed to repair the seriously damaged edge, suitable for blunt knives. Hold the knife at an angle of 10 - 30 , grind the edge on the surface of stone back and forth with gentle pressure until the edge is sharp enough.6000 Grit for -Sharp PolishingUsed to eliminate burrs of the edge. Polish the edge gentler pressure until smoothly and keenly.It can not only hone cleavers, shears, scythes but also scissors, razors, axes, chisels, etc just except serrated blades and ceramic knives It's made of prime white corundum and with a rubber holder for holding the stone securely while honing.Honing Instructions:1. Soak the stone in the Water for 5 minutes, and then put it on a steady 2. Use 2000grit side for coarse grinding at 10~30 degree angle gently for 15 minutes.Then Polish the edge for 10 minutes with 6000 Grit side.4. Keep some Water on the stone to stay .5. After honing, clean the knife with wet cloth or Water, then dry it.6. Use a soft brush to clean the stone, then put it in a ventilated place to dry.Material: White CorundumColor: Brown + WhiteDimension of stone: 18*6*3cmParticle size: 2000 grit (Brown Side), 6000 grit (White Side)Weight: 22.93ozPackage Contents:1 x Sharpening Stone 2000/6000 grit1 x holderOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.