Optical Coaxial Toslink Digital to Analog o Converter Adapter RCA 3.5mm L/R FEATURES: - Converts Coaxial or Toslink digital o signals to analog L/R o - Supports sampling rates of 32, 44.1, 48, and 96 KHz - Handles 24-bit S/PDIF incoming bit stream on left and right channels - Provides electromagnetic-noise-free transmission - Easy to install and simple to operate SPECIFICATIONS: - Product Name: Coaxial / Optical Digital to Analog o Converter - Input o: Coaxial, Toslink (Digital Fiber) - Output o: L/R (Analog) - Input Connectors: 1 x Toslink, 1 x RCA (Coaxial) - Output Connectors: 2 x RCA (L/R), 3.5mm - Sampling Rate: 32, 44.1, 48, 96 KHz - Operating Temperature: 0°C to +70°C - Operating Humidity: 10% to 85% RH (non-condensing) - Storage Temperature: -10°C to +85°C - Storage Humidity: 5% to 90% RH (non-condensing) - External Power Supply: 5V DC @ 2A - Power Consumption: 0.5 watts (max) - Compatible with ATV, SPDIF Digital o Decoder - Includes digital o decoder and supports external USB power - Supports 24-bit input stream with electronic noise reduction technology PACKAGE CONTENTS: - 1 x Digital to Analog o Converter - 1 x Toslink Cable (Optical Cable) - 1 x USB Power Cable - 1 x User Manual CONNECTION AND OPERATION: Before installation, ensure all connected devices are powered off. 1) Connect the o source device to the converter using a Coaxial or Toslink cable. 2) Connect the A/V receiver or amplifier to the converter using an L/R RCA cable. 3) Insert the DC end of the 5V power supply into the converter, then plug the power adapter into a wall outlet. Note: Remove the plastic caps from the optical connectors before use. A 5V power adapter must be connected. Set o output to S/PDIF mode. Insert and extract cables gently.