Feature:1. The chamfering tool is mainly used for 60 chamfering or taper hole of the workpiece, and chamfering the edges and corners of each surface.2. The 3flute design can complete the processing of the conical surface at one time, which is suitable for small cutting amount processing.3. The unique one-piece design makes it easier for the debris generated in the cutting process to fall without clogging the tool.4. Professional chamfering design can engrave and polish the workpiece without unloading.5. The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit.Specification:Item Type: Chamfer End MillMaterial: Tungsten steelChamfer: 60Application: Aluminum and copper milling cutter tools, engraving milling cutter bitsSpecification:D12 x 60 x 75LTip Diameter: Approx. 12mm or 0.5inShank Diameter: Approx. 12mm or 0.5inTotal Length: Approx. 75mm or 3inD10 x 60 x 75LTip Diameter: Approx. 10mm or 0.4inShank Diameter: Approx. 10mm or 0.4inTotal Length: Approx. 75mm or 3inD8 x 60 x 60LTip Diameter: Approx. 8mm or 0.3inShank Diameter: Approx. 8mm or 0.3inTotal Length: Approx. 60mm or 2.4inD6 x 60 x 50LTip Diameter: Approx. 6mm or 0.2inShank Diameter: Approx. 6mm or 0.2inTotal Length: Approx. 50mm or 2inD4 x 60 x 50LTip Diameter: Approx. 4mm or 0.2inShank Diameter: Approx. 4mm or 0.2inTotal Length: Approx. 50mm or 2inD3 x 60 x 50LTip Diameter: Approx. 3mm or 0.1inShank Diameter: Approx. 3mm or 0.1inTotal Length: Approx. 50mm or 2inPackage List:1 x Chamfer End Mill