Motorcycle electric heating handle, temperature-adjustable silicone protection handle AZ18129 [Handle length]: Left handle: 143*36MM; Right handle: 127*36mm[Handle Diameter]: 22mm[Input voltage]: 12V¡¾Product Power¡¿: 12W-24W adjustable[Handle temperature]: 50¡æ-70¡æ adjustable[Handle type]: Sealable and openable electric handle[Switch type]: Multi-stage adjustable switch[Applicable models]: 12V motorcycle with a handlebar diameter of 22MM¡¾Precautions¡¿:¡¾1¡¿When installing the left handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift.[2] For models with balance iron, please adjust the installation position of the balance iron. Do not squeeze the handle when tightening the screws. The balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handle. Excessive squeezing of the handle may cause difficulty in turning the handle switch, and abnormal damage such as the heating wire squeezing out of the handle surface.[3] Must be 22MM handle inner diameter.¡¾Installation Notes¡¿:¡¾1¡¿Remove the original handlebar.[2] Wet the inner hole with soapy water on the left hand, and the twisting amplitude should not be too large when installing.[3] When installing the balance iron on the left hand handle, adjust the position of the balance iron to be slightly separated from the handle, and do not squeeze the handle when tightening the screw.[4] When using the left handle as if sliding on a steel pipe, remove the balance iron, and fix it with a few drops of 502 glue from the end of the handle.[5] Power cord, the red wire is connected to the positive pole, and the black wire is connected to the negative pole (not reversed)[6] When installing the left-hand handle, the power cord should be left enough for rotation.¡¾Product advantages¡¿:¡¾1¡¿The handle is made of high-temperature resistant nitrile rubber at one time.[2] The heating wire is wound horizontally and has excellent comfort. The power is only half of similar products. It is a real high-efficiency and energy-saving electric heating handle.[3] Ultra-thin electric heating handle dedicated switch.[4] The throttle lead wire in the right hand is made of silicone fiber sleeve, which has no effect on the flexibility of the throttle.[5] The advanced electronic temperature regulation system does not consume power and can better protect the battery. , The high-quality handlebar switch is more exquisite than the original handlebar.[6] The detachable lid can be sealed and the opening can be switched freely.[7] This kind of structure is much more difficult than straight out. The line faces the back and the force is evenly not at one point when rotating. The wire uses a silicone sheath (the old wire does not have a silicone protective cover), which can be used in extremely low environments. Silicone has good aging resistance and will not harden over time.