The high-quality CTEK MXS 5.0 charger should be included in the inventory of every driver. It works especially well in winter, when low temperatures cause problems with batteries in vehicles and other equipment. Also in the spring, it will help to start motorized recreational or utility equipment, which was unused during the winter break. The model is designed for 12 V lead-acid batteries with a capacity of 1.2-110 Ah. Product features: battery type: lead acid battery voltage : 12 V maximum charging current: 5 A battery capacity 1.2-110 Ah supply voltage: 220-240 V functions: 8-step, automatic charging cycle, battery diagnosis, AGM battery charging, trickle charge, regeneration in the set: cable end to be installed permanently, cable end with "crocodile clips", cover CTEK MXS 5.0 is a modern charger designed for charging 12 V lead-acid batteries, capacity in the range of 1.2-110 Ah with a maximum charging current of 5 A. The device is perfect for charging batteries in motorcycles, passenger cars, vans, motor boats, tractors or farm or utility equipment, such as pumps, mowers, snow blowers, etc. The fully automatic, 8-step charging process is characterized by a variable current intensity depending on the state of charge of the battery. As a result, the battery maintains very good operational and operational parameters, which has a positive effect on its lifetime and durability. CTEK's patented desulfurization mode removes sulfate from lead plates and restores battery capacity. The charger is equipped with a number of programs that optimize the operating parameters, such as: mode for small batteries, mode for medium batteries, charging at low temperatures and AGM batteries (charging with a voltage of 14.7 V). Another useful mode is the regeneration of deeply discharged batteries. Another advantage of the device is the pulsed hold mode. It prevents overcharging and keeps the battery fully operational at its maximum charge. The CTEK MXS 5.0 rectifier is made of the highest quality components. IP 65 insulation provides protection against water and dust. Safety against sparking, reverse polarity and short-circuit protection are responsible for safe operation.