Feature:1. Adopt an advanced precise process to meticulously manufacture cuttable vinyl decals.2. Exquisite patterns perfectly match your vehicle, making your car more stylish and unique.3. With Stable performance and high reliability, longterm no fading, no damage to the car paint.4. Exquisite design, easy to attach, peel and paste with high quality, bring you more convenience.5. Easy to install without any complicated tools, just tear off the back to paste, convenient and fast.Specification:Item Type: Car StickersMaterial: Vinyl, PVCColor: BlackFitment: For Jeep F150 Wrangler Rubicon JK CJ TJ YJSize: Approx. 50x60cm/20x24inHow to Use: In order to reduce the difficulty of installation, the car stickers we provide have been covered with transfer film in advance. (Except for the whole block of continuous graphics)Dry Paste Method:1. Clean the body and keep it dry.2. Determine where to post. Under normal circumstances, slowly stick on one side, scrape it flat with a tool (not included), and peel off the bottom paper.3. If the graphics are really small, you can also tear off all the transparent transfer film and stickers before attaching them. But you must be careful not to accidentally stick.4. After pasted, scrape and press the sticker again and again. Tear off the transparent transfer film.5. Make a cut with a utility knife (not included) on the car door and sewing, and fit the sticker inward.6. Don't let the car sticker and the body have any separation or protrusion.2. Wet Paste Method:Tools (not included): rag, sprinkler, scraper or credit card 1. Clean the body, and evenly spray water on the body part to be pasted to reduce the viscosity of the sticker and facilitate the adjustment of the position.2. Determine where to post. Slowly stick on one side, scrape gently with a tool (not included), and peel off the bottom paper.3. When encountering door handles or anti-scratch strips, cut open the materials and pack them in according to the situation.4. Make proper adjustments. After confirming the approximate position of the graphics, wipe off the water and air bubbles repeatedly. Tear off the transparent transfer film.5. Make a cut with a utility knife (not included) on the car door and sewing, and stick it inward.6. Don't let the car sticker and the body have any separation or protrusion.7. Try to let the moisture in the car sticker dry, and if possible, it can be heated and dried appropriately. According to the weather, wash the car after one or two days..Package List:1 xCar StickersNote:1. Do not wax one week before deciding to dress up your car. The wax will make the sticker sticky. Do not wash the car within three days after the sticker is applied. Don't post on rainy days, it will not work well!2. If the sticker needs to be pasted on the door seam or other places that need to be moved, don't worry, just cut it off with a sharp knife (not included) after pasted.3. If you really don't want to do paste, please go to the local place where the car film is attached and ask for help.