[100% New -080 Replacement Spools]-080 With High-quality plastic automatic feed spool & durable string trimmer / edger replacement line, high-strength, durable thread, flexible and long service life. Premium 20-foot/0.080 inch replacement line and spool easily cuts through grass and weeds and supports fast cutting and longer lifetime. Use centrifugal force and aerodynamics to reduce drag and achieve fast cutting string[FITS MODELS]-080 Replacement spool fits for Black & Decker GH3000 LST540 LST540B GH3000R string trimmer replacement spool for Black and Decker spools models -080 / -080-BKP, also know as 080 / -080 AFS / 080 BKP. -080 Compatible with GH3000 7.5-Amp Electric String Trimmer, -080 Auto Feed Spool Single Line Trimmer[GH3000 Trimmer Spool Specification] Each gh3000 trimmer spool is pre-wound with a 20-foot, 0.08-inch diameter, Spool model: -080 / -080-BKP. Length 20 foot trimmer line provides a wider range of mowing area. 0.080 inches diameter wearable line supports fast cutting and longer lifetime. Spool Cover Model:90583594[Precautions for using gh3000 trimmer spool] The Replacement Spools can also save manual winding time and reduce damage for string grass trimmer and not get stuck when mowing. Wear goggles and long pants when you using this -080 replacement spools, protective measures should be taken to avoid damage to the body caused by spilled wires. Unplug tool before changing, installing, or removing accessories. The spool is only suitable for young grassesCompatible with: for -080 Spool, GH3000 Spool,gh3000 D18 parts,LST540 spool,LST540 parts,LST540 trimmer,GH3000 trimmer spool replacement,-080 afs spool,-080 auto feed spool,black and decker gh3000,feed spool -080,-080 black decker,GH3000 trimmer,black and decker gh3000 replacement spool,black and decker weed eater spool -080,black and decker -080-bkpUSE:1. Remove the battery.2. Release the tab to remove the cover and spring.3. Remove all broken lines or debris, and then replace or rewind the spool.4. Insert the wire end into the hub through the hole in the spool.5. Press the spool down and rotate until it falls into place (when installed in place, the spool will rotate freely from left to right for a few degrees.)6. Snap the hub cover and spring into place, connect the power supply and turn on the tool.Note: Please take protective measures when using this -080 to replace the spool. Unplug tool before changing, installing, or removing accessories. The spool is only suitable for young grasses.Material:plasticcolour:Black+Green+OrangePackage Contents:10 * Replacement Spool2 * 90583594 CapsOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.