0.77*0.67*0.51 Inch CH2 Spring Connector 20pcs LED Terminal Light Quick

Product Description: , Quick connection in one second Fast, efficient and safeNo screws, increase assembly speed Can completely replace electrical tape Reduce costs They are often used as an alternative to terminal blocks or wire soldering because they are faster to install and, unlike solder joints, can be easily removed for future modifications Use it in the 220V rated range, 1A. In relation between the load and the wire, the safe use of this product is 300W, please do not connect high-power electrical equipmentA crimp connector is an electrical connector used to fasten two or more low-voltage (or ultra-low-voltage) electrical wires. They are widely used in residential, commercial, and industrial electrical wiring in North AmericaCompatibility: 20-12 AWG, support flex wire, hard wire, single wire, and multi-strand silicone wireMake a wire connection in three steps (without fixing screw):1. Press the spring clip2. Insert the wires (plug in + i-correctly)3. Loosen Crimp ClampProduct Parameters:Color: WhiteModel: CH2Type: TerminalWorking Frequency: High FrequencyApplication Scope: LEDCuster Type: DINKSheck Shape: BarStripping Length: 2mm/0.079inchProduction Process: Injection MoldingFeatures: Fireproof/Fireproof Suppress Material: SteelInsulation Material: PPrectile Number: 2Pin Number: 2One Size: 19.5*17*13mm/0.77*0.67*0.51 inchPackage Included:20*CH2 Spring ConnectorNote:1. The actual colors of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.