[DETAIL] Tips When using for the first time,squeeze the toothpaste tube to exhaust air. About the toothpaste holder problems, including poor adhesive backing, caliber does not match the toothpaste can not be loaded into the toothpaste, toothpaste can not be squeezed out of the problem! The reference operation is as follows: 1. The adhesive paper at the back won't stick: Improvement program: refer to the commercial detailed tips: Usage: Step 1: wipe the smooth surface clean before installation The second part: wipe the surface without water droplets after tearing off the protective film, affixed to the wipe clean position Step 3: paste the air bubbles will be discharged, and static pressure for 30 seconds Step 4: Wait for more than 12 hours to start using Warm tips: 1). Be sure to exhaust all the air in the sticky hook when installing. 2). Please try not to use it on painted walls. If you have already used it, please do not remove the hook to avoid damaging the wall. 3). Before using it again, please heat it with hot air from a hair dryer for better sticking effect. 4). Only sticky hooks used for the first time on smooth and seamless surfaces such as glass, tiles, painted doors, etc. can be reused. 5). If dirt is attached to the removed hook, it may render the hook unusable. [ATTRIBUTES] - Hign-concerned Chemical: None - Material: Plastic - Origin: Mainland China - Hign-concerned Chemical: None - Material: Plastic - Origin: Mainland China