Features: 1. The light will automatically turn on when pedestrians enter the sensing range and will delay before shutting down once they leave. 2. It includes light-sensitive control, ensuring that the light does not activate during daylight or in bright conditions, although it can be set to activate in any environment. 3. During the delay period, if no human activity is detected, it allows for adjustment of the delay time within a suitable range. 4. Features effective LED fault indication for straightforward installation and troubleshooting. 5. Equipped with a built-in temperature compensation chip to minimize the impact of temperature on sensing distance. Specification: This motion sensor switch operates on infrared technology, automatically turning on when it detects changes in the infrared spectrum from a person within range. It offers high sensitivity and stable performance, turning on and off in response to movement. User-friendly, safe, and energy-efficient. Features: 1. The light will automatically turn on when pedestrians enter the sensing range and will delay before shutting down once they leave. 2. It includes light-sensitive control, ensuring that the light does not activate during daylight or in bright conditions, although it can be set to activate in any environment. 3. During the delay period, if no human activity is detected, it allows for adjustment of the delay time within a suitable range. 4. Features effective LED fault indication for straightforward installation and troubleshooting. 5. Equipped with a built-in temperature compensation chip to minimize the impact of temperature on sensing distance. Specification: Condition: 100% Brand New Item Type: Motion Sensor Switch Material: ABS Color: White Function: Relay control load Working Voltage: 12V DC Operating Temperature: -20 C - +50 C Static Power Consumption: 0.05W (220VAC) Load Power: 800W Load Capacity: Suitable for various weak electric lighting and monitoring equipment Wiring Method Input: 12VDC output 12VDC (can provide dry contact output) Output Mode: Inductive output Light Control Range: 5Lux - 500Lux 20% (inductance adjustable) Delay Range: 30-350Secs 30% (adjustable delay) Induction Method: Passive Induction Angle: 360 cone angle Sensing Distance: Approximately 5 - 7m / 16.4 - 23ft Installation Method: Suction point installation / Ceiling installation Size: Approximately 89 x 36mm / 3.5 x 1.42in Package List: 1 x Infrared Motion Sensor Switch 2 x Screw 2 x Green Expansion Tube 3 x Red Expansion Tube 1 x Manual Note: 1. Please allow for a 1-2mm error due to manual measurement. Thank you for your understanding. 2. Monitors may not be calibrated the same; colors displayed may differ slightly from the actual product. Please refer to the actual item as the standard.