Specification: Model PL6-01.6mm Tube OD x 1/8 BSP. Operating pressure range: 0-1 MPA, 0-60C. Premium Quality: Sturdy and durable, long service life. Wide application: used in the connection of pipelines and different pneumatic components. Quick connection: easy assembly and efficient installation. high installation. Product Description Product Advantage: The product quality is reliable, can be reused and has a long service life. You can insert or remove the hose directly by hand, which allows you to make various connections. It can be used for connection between various pneumatic tools and has a wide range of uses. The clip connecting the air duct is made of sturdy plastic material, which has good airtightness to prevent leakage. After the installation, it can be easily connected according to the direction of the pipe which you us need. Product parameter: Material: plastic and brass Working temperature: 0 - 60C Working pressure: 0-1 MPA Applicable pipe: PU/PA/PE/PVC Tips: Do not apply additional external loads (bending, twisting or pulling) to the pipe port, otherwise damage or leakage may occur. Packing list: 2 pcs PC adapters Roll up the material tape first we provided around the PC connector thread connection, which can effectively prevent leakage during the connection process. After the bottom is sealed, the pipe can be firmly connected and the blue seal can be rotated 360 degrees, with good sealing and no air leakage problem. After pressing the blue seal, insert the tube downward, then screw the threaded end and it is ready to use. Login prompt: Make sure the s the cutting surface of the pipe is vertical, that there is no scar on the outer circumference of the pipe, and that the cross section of the pipe is smooth and flat. When inserting the pipe , it should be inserted into the bottom of the tube. Failure to insert the tube into the bottom may cause air leakage. After the hose connection is installed, pull the hose to ensure that it cannot be pulled out of the hose connection . The pipe fittings are easy to install, flexible and space-saving, 360 degree free rotation, and the release ring adopts an elliptical design, easy to disassemble. Do not use it in locations with excessive dust or particles, and do not use any medium other than air. This product is limited to air or vacuum environment.