You will receive 2 pieces of our range hood light bulbs, sufficient quantity for your replacement needs. Product Size: The diameter of the range hood light replacement measures about 6.9cm/2.72in, the height is about 2.2cm/0.87in, and length is about 14.5cm/5.71in. Please measure the size of the lamp to be replaced and check whether the voltage and power are suitable before ordering. Premium Material: Our LED range hood light bulb is made of quality stainless steel and PP material, which are strong, reliable and not easy to break or damage. You can use it with confidence. High Brightness: The range hood can work under DC 12V voltage, with a power of 1.5W and a color temperature of 6500K, providing sufficient luminous efficiency. New Built-In Driver Solution: The kitchen range hood light bulb is perfectly compatible with 12V DC working voltage. Please pay attention to check the adaptability of the lamp you want to replace. In addition, its installation can be completed with a light click, simple and convenient. Provides a new solution for your built-in driver. If the range hood light does not light up after replacing it, consider the following: 1. Power failure: Check if it is plugged into a power socket to ensure that the power is on. 2. Wiring and plug issues: Check if the plugs are consistent, and if they are, verify that the positive and negative poles of the wires match those of the range hood wires. If not powered, they can be swapped and tested again. 3. Voltage malfunction: Our lamp is 12V 1.5W and cannot be used at voltages greater than 12V 1.5W, as it will directly burn out the lamp. 4. Control panel malfunction: If other functions are normal but only the light is not on, it may be a control panel issue; contact the manufacturer or professional maintenance personnel for repair. Color: As shown Material: Plastic Package Contents: 2 x Range Hood Light Only the above package content is included; other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to appear slightly different from the real thing. Measurement allowance is +/- 1-3cm.