1. Material: CNC finishing aluminum base + thickened plastic bracket. Pay attention when installing the trimming knife: be to place it to and lock it with a wrench.2. Loosen the screw on the stopper of the base, refer to the scale , the opening of the stopper can be adjusted to suit different board thicknesses, and the applicable board thickness range: 13-36mm.3. Refer to the scale markings to observe the depth of the trimming knife, adjust the depth of the groove, lock the trimming machine after adjustment, and working.4. The design of the limit chute can make the block parallel, the slotting process is without jamming, and the efficiency is higher.5. Purpose: It is suitable for installing FFO4-6, FF02-6 and other trimming machines with a diameter of 65MM. It is often used in the DIY production of panel furniture such as wardrobes, cabinets, and shoe cabinets.Material: aluminum colour: redPackage Contents:1 x Adjustment wrench1 x 11mm trimming knife1 x Invisible 2-in-1 slotted bracketOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.