2 Channel Rolling & Fixed Code Receiver 433.92MHz + 2 Remote Controls 433mhz 1527 Learning Code Transmitter+433 Antenna 433mhz Remote control Specifications: Material: Plastic + Metal Operating frequency: 433.92MHz Usage: For 433Mhz RF receiver 1527 decode This remote control only support the learning code (1527) of the receiver Note: This is not a clone remote. Cannot clone other remotes Universal 433mhz receiver SECIFICATIONS: 1. Power supply: 12v-24v DC 2. Frequency: 433.92Mhz 3. Codes: can work with any fixed/learning/rolling codes 4. 2 channel 5. Working temperature :-40- + 80 6.Built in Aerial antenna : Reception range 10-50m PROGRAMMING: Momentary working model: 1.Learning transmitters codes: Press learn 1 or learn 2 for 1 second, the learn_led light, then, press the button which you choose on the transmitter till the learn_led flash and go out, the transmitters code has been stored. Repeat the above steps for other transmitters. 2.Erasing transmitters codes: Press learn 1 or learn2 and hold on to make the learn_led light till go out, all codes of transmitters which had been stored are erased. ANT - Receiver Antenna CH1 - Relay Output 1 CH2 - Relay Output 2 V+ - Voltage + GND - Ground 433mhz remote control antenna Specification 1) Material : ABS & Metal 2) Color : Black 3) Frequency : 433.92MHz 4) Mounting: Screw (wall mount) 5) Cable Length (m): 2M 6) Bandwidth (MHz): 10 7) VSWR 1.5 8) Gain(dBi): 3 9) Max Input power (W): 20 10) Input Impedance(): 50 11) Polarization: Vertical 12) Antenna Length (mm): 250 13) Cable Type: RG174 Designed for any gate automation control boards or receivers. Increasing range of transmitters with 433,92MHz up to 250m!!! Impedence: 50 Ohm Bracket made from stainless steel Combination A Combination B