OPAx891 has stable unity gain and a bandwidth of 180MHz These amplifiers have a high driving capability of 200mA Each channel only consumes 7.5mA of power supply current The total harmonic distortion (THD) of OPAx891 at f=1MHz is -100dBc And it has ultra-low noise of 0.95nV/√ Hz Single channel amplifier OPA891 and dual channel amplifier OPA2891 can provide excellent AC performance Gain (G)=2V/V The slew rate is 105V/μ s The stabilization time is 70ns (0.1%) OPAx891 has stable unity gain and a bandwidth of 180MHz These amplifiers have a high driving capability of 200mA Each channel only consumes 7.5mA of power supply current The total harmonic distortion (THD) of OPAx891 at f=1MHz is -100dBc And it has ultra-low noise of 0.95nV/√ Hz Specially designed for applications that require low distortion and low noise, such as buffered analog-to-digital converters Production materials The core operational amplifier is a genuine single operation OPA891 patch SOP8 package Surface mounted SOP8 package to direct insertion DIP8 package The direct insertion device will conduct high-precision AP testing on each chip to verify residual noise (usually in uV) and THD (usually in 0.00%), so you can buy with absolute confidence! Residual noise: uV Signal to noise ratio: 1 * *. 5dB Dynamic range: 1 * *. 9dB THD distortion: 0.0000 * *% THD+N distortion: 0.000 * * *% Intermodulation distortion: 0.000 * * *% Frequency response bandwidth: ± 0.050dB. Color: As Shown Material: PC Package Contents: 2*single operation amplifier Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.