Tips: 1. After the shower barrier is installed, it is recommended to evenly coat the edges with silicone sealant (the product does not include silicone sealant) to enhance durability and waterproofing. 2. After installation, allow the shower barrier to stand for 25 hours before use. Avoid exposing the water-retaining strip to water during this time to ensure the silicone sealant fully cures. Multifunctional: Our shower barrier can be installed on floors or sinks, along the outer edge of countertops, and in the gap between the countertop and wall to prevent debris from entering the shower space (1-10mm), reduce water leakage and drips, and help achieve dry and wet separation. The shower barrier is only 13mm high, minimizing trip hazards and ensuring easy movement without interference. Applicable to Multiple Scenarios: The foldable shower barrier works well on all smooth floors and countertops, including kitchen countertops, sinks, bathroom door corners, bathtub edges, window sills, balconies, around washing machines, and at the base of toilets, forming an effective anti-spill barrier to keep floors and surfaces clean and dry. High-Quality Silicone Material: The shower threshold is made of environmentally friendly, elastic silicone. The surface is soft and smooth, and the material is waterproof, mildew-resistant, easy to clean, colorfast, deformation-resistant, heat-resistant, and freeze-resistant, making it suitable for year-round use. The shower threshold comes with a strong adhesive backing for secure bonding and long-lasting performance. Easy to Install: Before installing, ensure the floor or countertop surface is clean, dry, and free of dust or moisture to maximize adhesive effectiveness. Cut the barrier to the desired length using a knife, peel off the adhesive liner, apply it to the surface, and press firmly to secure. For bends, cut each piece at a 45-degree angle first, then join at a 90-degree angle for a smoother, more stable, and durable connection.