Sturdy and durable: The folding shelf bracket is made of high-quality stainless steel with a smooth surface to prevent scratches, has good corrosion resistance and rust resistance, and the triangular shape is the most stable structure of the wall bracket. Space saving: The folding shelf bracket is fixed to the wall at a 90-degree angle and has only one mounting surface. It takes up very little space. Just press the release arm and the bracket can be folded, which can keep your room clean and tidy. Widely used: The folding bracket is very suitable for many DIY jobs and is an extension of shops, workshops, boats, RVs, backyards, caravans, bedrooms, kitchens, balconies, bathrooms and other places. They can also be used for bookshelves, kitchen shelves and exhibition stands. Easy to install: The folding hinge bracket is easy to install and fold, so you can build a folding shelf bracket or a small wall-mounted folding table for your home or garage. You just need to make sure that the two folding brackets are parallel to each other and perpendicular to the wall. What you get: 2pcs x Folding Shelf Bracket. 2 pices x support de tablette pliante. If you have any questions about the products, you can always contact us and we will provide you with the best customer service. Specification: Material: stainless steel Installation method: screw fixing Color: silver Dimensions:30 x 12.8 x 2 cm/12 x 5 x 0.8 inches (length x height x width);; Weight (pc): 340 g x 2 Maximum load weight: 75 kg Package Contents: 2 x Heavy Duty Folding Bracket, 8 x Mounting Screws Note: 1. The product does not contain a wooden board. 2. The product must be installed horizontally and tightened to avoid loosening. 3. During use, the maximum load capacity, wall thickness and plate thickness should be considered so that the bracket is not overloaded and does not damage the wall or plate. 4. The width of the board should be at most 5 cm longer than the stainless steel bracket. 5. The number of folding brackets can be increased according to the length of the board, which can increase the load capacity. Installation method: 1. Measure the position of the bracket on the board 2. Reserve 1 mm (0.04 inch) for the plate at the end of the wall (near the wall). 3. Mark the punch position on the board. 4. Fix the bracket to the board with short screws. 5. Use a spirit level to make sure it is parallel and mark the appropriate position on the wall. 6. Use a drill to drill a hole in the mark. 7. Insert the expansion tube into the hole. 8. Fix the bracket with long screws. 9. Lift the spring button and press it to fold it.