Brand new high-quality products. Product name: suitable for chassis with ordinary motherboards transfer cable switch cable USB cable audio cable three-piece set. Product role: Applicable to with ordinary ATX motherboard and chassis. USB 9-hole plug into the USB 9-pin socket on the ATX motherboard, the 11-pin end is docked with 's 11-hole USB cable. Audio 9-hole plug ATX motherboard audio 9-pin socket, the 13-pin end is docked with the 13-hole audio cable of chassis. The 8-hole switch cable is a separate set of 4 jumpers, just plug it in according to the position of the switch jumper on the ATX motherboard, no need to distinguish the positive and negative, the 13-pin is docked with the 13-hole switch of the chassis (the hard disk indicator is inserted backwards and the light does not light up) , but will not burn the board, the reverse is fine). The three cables are all designed to prevent wrong insertion. If you can plug it in, it is right. If it is inserted wrongly, it cannot be inserted. You ' have to worry about the problem of damaging the computer. The audio and switch are both 13 holes, but these two foolproof positions It's not the , it won' go wrong. Notice: This is for ordinary motherboard installed in a chassis. Type:PCI-E Riser Number:Computer Graphics Card Core bit width:64bit Graphics slot:PCI Interface:-+dvi+vga Video memory type:DDR2 Video memory bit width:64bit Core frequency:550MHz (MHz) Video memory frequency:266 (MHz) color:Random color (cannot specified color) Material:PVC+24AWG tinned copper wire Package Contents: 1 x Switch Cable(about 20cm in length) 1 x USB Cable(about 10cm in length) 1 x Audio Cable(about 10cm in length) Only the above package content, other products are not included. Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.