WISNIOWSKI Remote Control 433.92MHz Rolling Code Garage Door Gate Opener Compatible Models: eL11Q, eL12Q, eL13Q, eL17Q, eLN, eLC RT1, eLB7Q, eLB7Qk, eLB7Qk2, eL4T, ELFAA, ST1, ST2, ST3, eL3V1Q, eL3QV1, eL6V1Q, EL6, ES6, ES62000, eL21Q, EL500, EL1000, eL4000, 2k433 (order number 10646 only), 4k433 (order number 10647 only), 4GO (order number 93532 only) Equipped with HCS301 chip Rolling code version Requires access to receiver Battery included This is not an original product but ensures a perfect fit. All brand names, trademarks, and registered trademarks are the property of their respective owners and are used only for identification purposes. Features: 1. Programming type: Programming via receiver 2. Number of channels: 4 3. Code type: Rolling code 4. Frequency: 433.92MHz 5. Operating range: 10-50 meters (open area) 6. Power supply: 12V 27A 7. Remote includes battery Security: Dynamic rolling code provides high security and is non-copyable Note: Your existing remote must match the model shown. The new remote is not compatible with other remotes. Package Includes: 3 x Remote Controls 3 x Batteries 3 x Keychains 1 x English Manual Programming Instructions: Programs the same way as original WISNIOWSKI remotes. Please consult your receivers user manual for specific steps. Materials needed: Your receiver 1. Open the receiver unit on the garage door opener. 2. Press the programming button (labeled ENR, MEMO, or PROG). 3. On some models, hold the programming button. 4. The LED on the receiver will indicate programming mode has started. 5. Press and release any button on the new remote for one second. 6. The receivers LED will change or turn off to confirm successful programming. 7. Wait a few seconds for the system to exit programming mode. 8. Your remote is now programmed and ready to use.