name: speed controller appliction: generator Brief Introduction of functions:speed controller is a design with full electric closed loop path control function, which can It controls the Cummins motor perfectly when connecting with the combined actuator in the EFC system, since it can Controls engine speed quickly and accurately once there is an instant load change. electrical specification: Model Number: 3062322 RPM stability: Less than± 0 25% Speed ​​range: 1 KHz ~ 6.5 KHz Thermal stability: max. 0. 7% IDLE Regulation: 260 ± 20Hz DROOP regulation: minimum 15Hz ± 6Hz / 1 amplifier Maximum: 400Hz ± 75Hz / 1 Amp External speed regulation: ± 200Hz (with 1 K ohm connected) Auxiliary input sensitivity: 148Hz / 1 V., ± 10Hz Impedance: 1M ohm Environment: Working temperature range: -40-85 Operating humidity range: maximum 95% Average temperature: -55 ~ 92Celsius Shocking: 20-100 HZ 500mm / sec. input power supply Voltage: 12 V or 24 V Pole ground pole: negative pole Power supply: 40 mA Actuator continuous current: Minimum 1 A, maximum 4.5A MPU signal: 2 ~ 120V RMS DROOP function: when the load increases, the engine operating speed will be Decreased If you turn down in a clockwise direction, the value of the running speed will be Increase; if you turn down in the reverse direction, the fall value of the running speed will be Diminished. colour:Black Material:metal size:15*15*6.5cm Package Contents: 1*Speed control Note: The above parameters are tested with an operating frequency of 3800Hz. Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.