Feature: 1. Suitable for remote data acquisition and control equipment. 2. Silver alloy contacts have good conductivity and quick response. 3. Compact appearance, convenient installation and simple use. 4. The voltage can be converted from 4‑20mV to 0‑5V 0‑10V, with good performance. 5. High efficiency, very reliable and practical, suitable for various electronic projects. Specification: Item Type: Voltage Converter Module Material: PCB Working Voltage: 9V ~ 24V Input Current: (4.00MA ~ 20.00MA/0.00mA ~ 20.00mA) Output Voltage: (0.00V ~ 5.00V/0.00V ~ 10.00V). Control Mode: 4.00MA (milliampere) ~ 20.00MA (milliampere) input is converted to corresponding (0.00V ~ 5.00V/0.00V ~ 10.00V). Output Method: J1 pad on the circuit board: open circuit (input 4.00mA, ~ 20.00mA); short circuit (input 0.00mA ~ 20.00mA), the default is open circuit The J2 pad on the circuit board: open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit. Module Interface: 24V: Power supply positive port (9V ~ 24V). G: Power ground interface. IN: Signal input interface (4.00MA ~ 20.00MA/0.00MA ~ 20.00MA). G: Power ground interface. OUT: Signal output interface (0.00V ~ 5.00V/0.00V ~ 10.00V). G: Power ground interface. . Package List: 1 x Voltage Converter Module Note: 1. When the output is 0.00V ~ 10.00V, the power supply voltage must be 15V.2. Please note that the new type and old type of this product will be sent randomly,and make sure you will not mind before ordering.