4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

٣٬٧٤٩٫٠٠ E£
والشحن مجاناً

4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

  • العلامة التجارية: Unbranded

4-in-1 Wall Finder Metal Detector with LCD Screen - Stud Finder & Electric Cable Detection Wall Scanner for Home Use

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٦٬٩٩٠٫٠٠ E£
السعر: ٣٬٧٤٩٫٠٠ E£
أنت توفر: ٣٬٢٤١٫٠٠ E£ (46%)
البائع:
٣٬٧٤٩٫٠٠ E£
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

New ModelsWide Application: This finder can be used to detect the position of the center of wood rod in the walls of wooden planks and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.4-in-1 detection mode: This stud finder has 4 different modes that can be switched: stud scanning , Deep Mode, Metal Scan and AC Scan.Multifunctional: Stud Scan is used to find and locate the center and edge of wood and metal studs with a depth of 19mm The maximum deep scan positioning depth is 38 mm Maximum metal detection depth reaches 60mm AC Scanning can detect AC wires with a depth of 51mm.Screen display and alarm prompt: During the detection process, the display screen will show the detection mode , signal strength, direction indication, etc. Also, the intensity of the buzzer will vary depending on the distance between you and the target, you can mark the position with a marker when the sound is loudest. And it has AC warning function.Easy to calibrateYou need to calibrate the detector before every scan. You first select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the dimming bar disappears and a beep sounds. In metal or AC mode, you need to place it in the air for calibration.Product DescriptionWide ApplicationThis finder can be used for detect the position of the center of the wood rod in the walls of wooden planks and plasterboard, as well as the position of metal and AC cables, so that you can accurately install TVs, cabinets, drill holes in the wall, etc.How to calibrateYou must calibrate the detector before each scan. You first select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the dimming bar disappears and a beep sounds. If you accidentally shake the scanner, you need to recalibrate the device. In metal or AC mode, you need to place it in the air for calibration.SpecificationColor: Black and silverPackage included:Wall sensorx1Batteryx1
  • هوية Fruugo: 392380352-839506063
  • EAN: 9107337647340

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: مجاناً - التسليم بين الثلاثاء 28 أكتوبر 2025 – الاثنين 03 نوفمبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Zhuzhou Kemai Trading Co., Ltd
  • Zhuzhou Kemai Trading Co., Ltd
  • Shop No. 106-M105, No. 3 Factory, No. 3, Baiguan Industrial Park, No. 136, Dongfu 2nd Road
  • Zhuzhou
  • CN
  • 412002
  • hulking2025@163.com?
  • 19377106697

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901