360 Degree Adjustable: 360 drip irrigation emitters 8-hole full-circle spray pattern, adjustable flow rate irrigation drippers, you can adjust the amount of water by rotating the outer cap to open or block holes, saving water resources and money. Design: Adjustable flow 0-70 L/H - 1/4 (4-7mm) adjustment drip irrigation - professional quality drippers for drip irrigation. The stake dripper comes with an extra connector to attach the 1/4"" drip tubing! Can be used for all terrains. Be sure to put the connected part in 70~80 water for 10 seconds before assembling it. Once cooled the tube will stay tight. High QualityMade of quality material. Lightweight, anti acid and alkali, anti corrosive, low temperature resistant, odorless. The bottom of the dripper is sharp and easy to insert into the ground. Durable and long service life in the ground. Wide Use: Drip irrigation emitters can be used in low pressure situation. Suitable for pots, tubs, ground cover, landscape gardens, flower beds, vegetable gardens, greenhouse, orchard, lawn, self-planting, watering herb gardens, etc. 0 Product description Features: The dripper has 8 outputs to emit 8 jets of water for balanced irrigation. Dripper irrigation adjustable water flow at 360 degrees. Each head drips. drop has an adjustable cap that allows for simultaneous control of flow rate and wetting area. Each drop can be removed from the drop e for cleaning. With a pointed stake, no other support is needed. Simply insert it into the dirt. after connecting it to the drip irrigation tube drop. Specification: Radius of spray: 0-50cm Material: PP Length: approx. 13cm / 5.1 inch Suitable for 4mm / 7mm tube (inner / outer diameter) < p class="a-spacing-base">Package included: about 100 x watering stakes for drip irrigation system; drop Warm tips: 1.The connector of the emitter is specially designed for a firm connection to the pipe. It may take some strength and methods to attach them. We recommend either softening the pipe beforehand with hot water, or enlarge the tube opening with proper tools. 2.Please allow 1 to 1 error. 5mm due to manual measurement. 3.The product may cause odor in the packaging for a long time. Please open and re-air convection in 1-2 days. The smell will disappear normally.