Package content: package comes with 6 sets of fan balancing kit, including 6 pieces plastic balancing clips and 6 pieces self-adhesive metal 5g weights and 9 pieces metal self-adhesive 3g weights, sufficient quantity and different weight can meet your daily needs and replacement simultaneously. Practical function: fan balancing clip can locate the problem area more easily, and 6 pieces metal self-adhesive 5g weights and 9 pieces self-adhesive 3g weights can help correct shaking; Besides, permanent weights are fixed by sticky adhesive, so they are not easy to fall off. Working principle: according to the explanation of physics, when the fan rotates, if the area of the bearing wind is more thinner, the resistance of the patch will be less resistant, so that the patch will be more favorable to be stuck to the fan blade. Multiple functions: solving the swing problem caused by irregular or blade brackets, ceiling fan blade balancing kit can not only be applied for preventing the ceiling fan from wearing, but also can fit for reducing noises, thus maintaining good support of the fan and extending other components' service life. Extensive compatibility: fan weight balancing kit is compatible with most ceiling fans.<br><br>Using Steps 1. Turn the fan on and set the speed control setting to a speed at which the wobble is the greatest. 2. Turn off the fan and allow it to come to a complete stop select one blade and place the balance clip on it. Halfway between the blade holder and blade tip on the trailing edge of the blade. 3. Turn the fan on Note whether the wobble has increased or decreased. Turn the fan off ,move the clip to another blade, and retest. Repeat this procedure on all noting the blade on which the greatest improvement is achieved. 4. Move the clip back to the blade that showed the greatest improvement. Move the clip inward and outward on this blade and operate the fan to find the position where the clip gives