Operating Instructions: Enter anti-theft mode: 15 seconds after turning off the ignition, the system automatically enters anti-theft mode. The button lights turn off and all vehicle power is disabled; operations are invalid. Exit anti-theft mode: Bring the ID sensor card close to the induction coil area on the vehicle. Two beeps will sound, indicating the anti-theft system has been disengaged. The button will flash, and the vehicle is ready for operation. One-touch start: Press and release the button while depressing the foot brake. The vehicle will start automatically within 0.5 seconds. One-touch stop: Press and release the button while depressing the foot brake to immediately turn off the vehicle. One-touch accessory power: Without pressing the foot brake, short press the button to activate accessory power (equivalent to the first ignition position). One-touch instrument panel power: Without pressing the foot brake, press the button again after accessory power is activated to power the instrument panel (equivalent to the second ignition position). Parameters: Operating voltage: DC 12V (does not support 24V power supply) Standby current: 8mA (continuous standby up to one month) Button indicator: Blue light (blue light off in anti-theft mode, flashes when exiting anti-theft mode) Anti-theft activation: System automatically locks engine 15 seconds after ignition is turned off; all power is cut and button light turns off Anti-theft deactivation: Use ID sensor card near induction coil; two beeps confirm system disengagement Brake light output voltage: DC 12V (output duration controlled by foot brake) Brake light output pattern: Each time brake is applied, brake light flashes 4 times then stays on; turns off when brake is released Alarm function: If unauthorized braking is detected, brake lights will flash for 15 seconds as an alarm Compatibility: A. Suitable for vehicles without remote control or factory anti-theft systems, such as caravans or small A0-class cars. After installation, the vehicle gains one-touch start/stop, hidden anti-theft lock, brake light flash, and brake alarm functions. B. Compatible with vehicles equipped with standard anti-theft devices, PLC alarms, or basic alarm systems. Installation adds enhanced protection and additional functionality including one-touch start/stop, hidden anti-theft lock, brake flash, and brake alarm. C. Can be integrated with PKE smart keyless entry systems to enhance vehicle intelligence and convenience. Includes one-touch start/stop, hidden anti-theft lock, brake flash, and brake alarm functions. Note: During installation, remove the original ignition key and disable the steering column lock mechanism. Disconnect the original ignition switch to prevent interference when the key is removed. Color: Black Material: ABS Package Contents: 1 x RFID Smart Engine Start Push Button Kit 1 x English Instruction Manual Note: Lighting and display differences may cause slight color variation between the product image and actual item. Measurement error allowed: +/- 13 cm.