Toothpaste Dispenser More InstructionIf your tube has a snap-on cap vs the screw-on lid, you must screw of that snap-on cap before inserting the tube. Then you screw in the tube where the product says to.1. You have to squeeze the tube before it will dispense.2. You must need to clean it every 5-7 days. You can taken it apart and cleaned it. It's easy to clean 3. Do not try this dispenser with Sensodyne toothpaste as the tube is different that say, Crest or Colgate.4. The dispenser does not "automatically" dispense when you put your toothbrush in it. You must push the toothbrush against the lever that hangs to get the toothpaste to come out.5. If your child is under 6 years old, Please accompany your child to use this product. This will not let the child mess up the toothpaste.6. If you want to remove the toothpaste dispenser from the wall, you need to use a blower to blow the back of the product until the solid glue on the back melts. This process may be a bit long, please be patient and remove it.7. If you receive the wrong color, please contact me as soon as possible, I will solve the problem for you.Detachable DesignSize is 2.62.85.7 inch.The wall mounted toothpaste dispensers are made of ABS plastic, non-toxic and durable.Automatic Toothpaste dispenser is specifically designed for your normal needs and suits for a small than 0.47 inch(1.3cm) toothpaste tube.Installation Steps-Clean and dry the wall, Rip off the protective film of the adhesive.- Stick to the wall and vent the air, Install toothpaste into the Toothpaste Dispenser.- Place toothpaste, Squeeze toothpaste by manual to vent air.- Please use it after 24 hours of installation.Installation NotesApplicable wall: smooth tile, wooden wall, smooth marble, smooth glass, frosted glass, smooth metal.Not applicable wall: wallpaper, lime wall, paint wall.Please clean and dry the wall before installing.