Automatic Water Level Control Valve Tower Floating Tank Ball Valve

١٬٣٤٩٫٠٠ E£
+ ٥٣٥٫٤٩ E£ الشحن

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • العلامة التجارية: Unbranded

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ١٬٦٩٩٫٠٠ E£
السعر: ١٬٣٤٩٫٠٠ E£
أنت توفر: ٣٥٠٫٠٠ E£ (20%)
البائع:
١٬٣٤٩٫٠٠ E£
+ ٥٣٥٫٤٩ E£ الشحن

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Automatic Water Level Control Valve Tank Tower Floating Ball Valve Q81COOTDTYThe valve is a replacement for the traditional float, which can be used for various high water water systems, swimming pools, water towers of industry and civil construction, etc. Automatic control, low self-replenishing water, water fully automatic stopFour inlets, large water volumeBeautiful appearance, small size, practical, simple installationNo electricity, easy to use, long service life, low failure rate, saving water resourcesWorking pressure range: 1-10KG (0.1-1mpa)Application Medium: water cleaningSuitable temperature Medium: le; 70 °C High Temperature Resistance Average Temperature: 70 °C - 120 °C When the pool level or water tank drops, the valve body will fall, and then the control valve precursor will be opened. Because it affects the water pressure in the pipe, the sealing surface of the control valve will be opened. Finally, the water comes out and vice versa. Note: This production belongs to liquid level control valves. Once installed, the float must be vertical. If you want to install from the top, the elbow needed to connect the float valve and inlet pipe. Firstly, the supply line should be fixed in the horizontal plane, and then connect an automatic valve to adjust the water level at the water inlet according to the standard. The main water inlet should be lined with the normal diameter of the control valves. The ball valve should be open when in use. If two valves are installed in the same pool, the two valves should be kept in the same horizontal plane. Before installation, clean the debris in the pipes in case of blockage. If the water quality is not good, the valves must be properly maintained. If users find that the time of adding water becomes longer, they can just load the water inlet and wash it Material: Nylon PA66 + Food Grade RubberSize: 72x50x70mm Quantity: 1 PcNote: Please allow 1-3mm error due to manual measurement. Pls make sure you do not mind before you make a bid, due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Content:1 x Water Level Adjusting Valve
  • هوية Fruugo: 397918466-848419493
  • EAN: 6935169992436

التسليم والرد

يُرسل خلال ٥ أيام

  • STANDARD: ٥٣٥٫٤٩ E£ - التسليم بين الجمعة 03 أكتوبر 2025 – الخميس 16 أكتوبر 2025

يُشحن من هولندا.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com