Boost Pump, Automatic Booster Pump for Water Heaters, Small 24V DC Water Pump

General DescriptionThe 24V DC automatic water booster pump is a small, quiet water pump designed to boost water in domestic systems, including solar water heaters, showers, and pipelines. It offers a flow rate of 15L/min and a delivery head of 18M, with a boost pressure of 65Pa, ensuring stable and reliable water pressure. Its automatic operation is controlled by the water flow, making it convenient and energy-efficient.FeaturesAutomatic Operation Controlled by Water Flow: The pump's opening and closing are automatically controlled by the water flow. When you open/close your faucet, the pump starts/stops automatically. Be sure to open the faucet before starting the pump to ensure water flow inside.Multi-System Compatibility: Can be used with tankless or tankless water heaters. Maximum flow rates of 15L/min and a maximum delivery head of 18M.Water Level Protection: When the water level at the pump inlet is low, the pump automatically shuts off for protection.Low Noise: Designed to operate quietly, providing a peaceful user experience.SpecificationsOperating Voltage: 24VPower Supply: 100-240V EuropeanInsulation Class: Class HProtection Rating: IP56Boost Pressure: 65PaStart-up Mode: Automatic control by water flowFlow Rate: 15L/minHeading Height: 18MInner Diameter of the Connection: 15mmArea Temperature: 2-65°CList Packaging1 * Pump1 * Power Adapter1 * Water Hose1 * User Manual1 * Hanging HookUsage and PrecautionsUsage:Install the pump directly according to the instructions.Open the tap before starting the pump to ensure water flow.Precautions:The water flow tap integrated into the pump requires a minimum water flow of 1.5 L/min to open the valve and start the pump. If the water flow tap cannot open, unplug the pump for 3-5 seconds and reconnect it. The pump will start by force for 10 seconds.If the pump runs for 10 seconds after connection and then stops automatically, this indicates that the water flow tap is not open.Test Method: Take a mineral water bottle and fill it with water. Typically, a mineral water bottle holds 500 ml, and you can install and use approximately 3 bottles per minute.Ensure the pump is properly installed and maintained to guarantee its proper operation and longevity.