Description 1Pc RJ45 Keystone Cat6 Cat6A Shielded Zinc Alloy Module Jack Network Adapter Features: Supports network transmission up to 1G 250MHz, perfect for your Gigabt network, 50 gold-plated on the contacts (Phosphor Bronze material) area, mating cycles 750 times Keystone Jack, Full Shielded, RJ45 to LSA Tool Free Connection With adjustable cable clips to make sure any size of cables can be suitable With transparent insulation pieces inside the houing to avoid short circuit problem between the wires ends and the metal housing 568A 568B wiring color code stickers on the caps and the terminal body - Easy installation Specifications: Module:Cat6,Cat6A Color: Silver Material:Phosphor Bronze Wire Clip With Strong Column,Zinc alloy gold-plated Brand:Aucas Product:Cat6/Cae6A FTP Zinc Alloy Module Port:RJ45 Nickle Pin:50U Gold-Plated Plug:750 Times Connect:250 Times Port:Support Standard 86 Type Face Plate Test: for Fluke Test Approved Size :Length :35mm(1.38in) Width :15mm(0.59in) Heigth :14mm(0.55in) Quantity: 1PC Quick Installation Guide 1.Put the network cable into the back cover of the module 2.strip the cable about 40mm naked 3.place the 8 wires to be correct position according to 5688 color code on the cap 4.Cut off the wires end flat with cap 5.Such as the effect picture in the picture 6.put the cap(with placed wires)on the LSA,according to the correct color code on both 7.Lock the housing,if necessary can use a plier to squeeze it to be locked 8.put the nylon cable tie and finish 9.Lose excess tie 10.Connection panel Note: Size for manual measurement, there may be a 0 to 2 for cm error, belongs to the normal phenomenon. And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you Package includes: (Without retail package) 1 x Cat6/Cat6A Shielded Keystone Module