Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

١٬٩٤٩٫٠٠ E£
+ ٩٠٠٫٩٩ E£ الشحن

Convertible Vehicle Weather Seal Replacement Kit for Soft Top Roofs

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٣٬٨٩٩٫٠٠ E£
السعر: ١٬٩٤٩٫٠٠ E£
أنت توفر: ١٬٩٥٠٫٠٠ E£ (50%)
البائع:
١٬٩٤٩٫٠٠ E£
+ ٩٠٠٫٩٩ E£ الشحن

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Description for Mini One Cooper S Convertible R52 (2001-2006) rear hood soft top weather rubber seal repair self adhesive. This product is a DIY rubber repair solution for replacing the worn or cracked rear weather seal on the soft top of the Mini Convertible. It replaces the rubber strip located above the chrome trim that runs along the rear edge above the boot and quarter panels, an area commonly affected by aging and sun exposure. The repair seal is self-adhesive with 3M tape and measures approximately 2 meters in total length. Minor trimming may be required to fit the length and accommodate the third brake light. Instructions: Step 1: Clean the surface thoroughly to ensure maximum adhesion. Step 2: Apply the new rubber strip over the prepared flat edge where the old rubber was removed, slightly overlapping onto the roof material. Use additional adhesive to reinforce bonding. Note: Adhesive sets quickly, so ensure correct placement before application. The new rubber provides a slightly increased profile where it overlaps the chrome, improving both appearance and sealing performance. It helps protect the roof from UV damage and restores weatherproofing. This repair has been tested on an R52 model and proven durable through multiple seasons in various weather conditions. Avoid high-pressure washing of the roof area. Clean with a sponge and rinse with water. For added security, apply a small amount of super glue (not included) in concealed areas to prevent lifting, or use a bead of silicone if needed. For easier installation, the strip can be removed temporarily to allow trimming away from the vehicle, minimizing risk to the roof fabric. Tamper-proof Torx screws under the chrome strip can be accessed by releasing the side latches (boot loading mode), allowing the lower roof section to be tilted up. Support the roof with a suitable prop during work. Package Includes: 1x replacement self-adhesive rubber seal
  • هوية Fruugo: 425741200-894207258

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

تحذيرات السلامة:
  • Keep out of reach of children: Prevent accidental ingestion
  • misuse
  • or harm.

التسليم والرد

يُرسل خلال 24 ساعة

  • STANDARD: ٩٠٠٫٩٩ E£ - التسليم بين الأربعاء 05 نوفمبر 2025 – الأربعاء 12 نوفمبر 2025

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Jiang Jiamin
  • Shanghai Zhenyou Technology Co., Ltd.
  • Building 1, No. 5601, Yanqian Road Fengxian District
  • Shanghai
  • CN
  • 201400
  • chengchan41525@163.com
  • 13822016759

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149