DC-4G RF Programmable Attenuator 6-Bit Parallel Control Digital Programmable Attenuator 31.5dB Attenuation_qt5

٤٬٢٤٩٫٠٠ E£
+ ٣٤٦٫٤٩ E£ الشحن

DC-4G RF Programmable Attenuator 6-Bit Parallel Control Digital Programmable Attenuator 31.5dB Attenuation_qt5

البائع:

٤٬٢٤٩٫٠٠ E£

وفّر ٢٬٦٤١٫٠٠ E£ (38%)

السعر الأصلي

٦٬٨٩٠٫٠٠ E£
في المخزون
+ ٣٤٦٫٤٩ E£ الشحن

سياسة الإرجاع لمدة 14 يوما

طرق الدفع:

  • العلامة التجارية: Unbranded

تفاصيل المنتج

تفاصيل المنتج

DC-4G RF Programmable Attenuator 6-Bit Parallel Control Digital Programmable Attenuator 31.5dB Attenuation_qt5

Advanced RF control: This digital programmable attenuator provides signal modulation from DC to 4 GHz, suitable for various RF applications Digital programmable attenuators are used to adjust the signal level in communication systems. This module uses digital programmable technology to achieve signal level adjustment within the DC-4G broadband frequency range Using parallel control, the control interface is reserved, and can be connected to an external mechanical switch or external MCU control. The attenuation step is 0.5dB, achieving 0.5-31.5dB broadband attenuation adjustment Using CNC shell packaging, it has good electromagnetic shielding performance and can be cascaded with other modules Wide range of uses: very suitable for wireless communication testing, signal integrity analysis and RF system calibration, which can improve project reliability and efficiency Working frequency: DC-4GHz Control mode: parallel (support single chip parallel control) Insertion loss: 1.5dB (typical value) Attenuation range: 0.5-31.5dB Maximum input power: 27dBm (500mw) Power supply: and5V single power supply Control interface output: through-hole capacitor Impedance: 50Ω Input and output interface: SMA Control rules: D1-D6: set 111111 attenuation 0dB D1-D6: set 111110 attenuation 0.5dB D1-D6: set 111101 attenuation 1dB D1-D6: set 111011 attenuation 2dB D1-D6: set 110111 attenuation 4dB D1-D6: set 101111 attenuation 8dB D1-D6: set 011111 Attenuation 16dB D1-D6: Set to 000000 Attenuation 31.5dB Voltage control protocol: Low level 0: 0 to and0.6V (ground is also possible) High level 1: and2.5V to and5V Colour:As Shown Material:CNC Due to different batches, there may be differences in product appearance and printed text, which will not affect use Package Contents: 1 x RF Programmable Attenuator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real
  • هوية Fruugo: 531455950-1077956695
  • EAN: 9641167385626
السلامة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Zhuzhou Kemai Trading Co., Ltd
  • Zhuzhou Kemai Trading Co., Ltd
  • Shop No. 106-M105, No. 3 Factory, No. 3, Baiguan Industrial Park, No. 136, Dongfu 2nd Road
  • Zhuzhou
  • CN
  • 412002
  • [email protected]
  • 19377106697

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • EU Consulten Srls
  • EU Consulten Srls
  • Via Varessina 55 Milano 20156 Italia
  • Milano
  • IT
  • 20156
  • [email protected]
  • 39 3285832654
التوصيل

توصيل

يُرسل خلال ٣ أيام

  • STANDARD: ٣٤٦٫٤٩ E£ - التسليم بين الثلاثاء 06 أكتوبر 2026 – الاثنين 12 أكتوبر 2026

يُشحن من الصين.

الإرجاع

الإرجاع

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل.

عرض سياسة الرد الكاملة